高成材料建議：
請填寫您的材料需求，我們將於24小時內提供專屬您的材料需求建議書(請盡可能填寫，部分條件若不清楚或不要求可忽略不填)
產品介紹
產品名稱 /
Torlon PAI 4301,Graphite and Teflon Filled石墨和鐵氟龍添加
產品介紹 /
Torlon PAI 4301, Graphite and Teflon Filled石墨和鐵氟龍添加, Tecator TI5031, Bearing軸承等級, Black黑色
The addition of graphite and PTFE provides higher wear resistance and lower coefficient of friction compared to the unfilled grade as well as little or no stick-slip in use. This grade excels in severe wear applications such as non-lubricated bearings, seals, bearings cages and reciprocating compressor parts.
TORLON 4301 PAI添加PTFE和石墨，與未填充時相比，耐磨性好，磨差係數低。在較寬的溫度範圍還表現出優秀的尺寸穩定性能。該級別材料多用於耐磨要求極高的場合，例如無油潤滑軸承、密封、軸承隔離環和往覆式壓縮機零件
★TROLON PAI有極易受各種化學破壞的缺點。蒸氣也將使該材料特性迅速降低。當需要再高溫下工作又特別需要化學性能和抗水解性能時，PEEK可能是理想材料
★由於TROLON PAI有相當高的吸濕性，如零件再高溫下工作或加工精度要求較高時，在安裝前應乾燥處理，如果潮濕而零件又迅速在200℃以上的環境下工作，將可能導致熱衝擊變形
產品種類:Torlon PAI 4301板,Torlon PAI 4301棒
好料搜尋:TorlonPAI4301,PAI4301,PAI+PTFE,工業塑膠,高階工程塑膠,耐高溫材料,適合軸承齒輪材料
產品特性
The Physical data contained in this table are typical values. They are obtained on the test specimens under specific conditions and represent average values of a large number of tests. The result obtained on this test specimen cannot be applied to finished parts without reservations, as behavior is influenced by processing and shaping. Reproduction only with our declared permission
材質特性資料僅可作為選擇材料之參考，不可做為實際產品使用之依據，此特性資料提供不附帶任何保固和其他用途。
資料讀取中.......