高成材料建議:

請填寫您的材料需求,我們將於24小時內提供專屬您的材料需求建議書(請盡可能填寫,部分條件若不清楚或不要求可忽略不填)

產品介紹

產品名稱 /

R1000,微細精密孔穴加工用

產品介紹 /

R1000, 微細精密孔穴加工用, Nature本色

★半導體IC插槽測試及製具專用

R1000 Test Socket Plate boasts excellent dimensional stability and is specially designed for precision hole drilling. Producing holes with a diameter of several tens of microns in conventional engineering plastics is associated with various problems caused by the flash, the need for post processing, probe pin errors, and other factors. So far, only a limited number of wholly aromatic polyester resigns could be used for plates and other parts requiring ultra fine holes. Special resin treatment and proprietary molding technology make Topfine R1000 a super engineering plastic that largely eliminates flash related problems during precision machining. Consequently, there is now a wider choice of materials for appplications requiring ultra-fine precision holes.
R1000插槽測試板材具有優異的尺寸穩定性,專門被設計用於精密的鑽孔用途,一般的工程塑膠在加工時容易產生毛邊,容易造成誤差產生,之前如果要做精密加工只能使用全芳香聚酯樹脂板材,現在R1000是由特殊樹脂配方及專業的成形技術製造而成,其特有的微細孔加工能力,可擴大精密加工的使用範圍

Topfine R1000 is based on PPS resin featuring high dimensional stability. Because the composition also contains a high percentage of different kinds of inorganic particles, it can be described as a compound super engineering plastic material. It not only boasts improved cutting and broing workability, but also has excellent stiffness on par with fiber-reinforced resin which is notoriously difficult to cut.
R1000的基材是PPS,加上高比例的無機微粒子的複合樹脂,之前除了全芳香聚酯樹脂外只能用一些纖維強化的樹脂材料,雖然剛性高但卻難以加工,R1000跟纖維強化此種材料比較起來,一樣具有高剛性,且加工容易

★吸水率、線膨脹係數極低,具有尺寸穩定性的優點
★切削加工性能優,極微細孔加工可能,毛邊的產生極少
★具有非纖維強化樹脂中的高彈性特性

☆R1000其硬度極高,因此在加工時需謹慎選擇加工刀具
☆其延展性不佳,在某些缺口加工下容易有缺角情況發生,因此在加工時需注意製品的外觀狀況
☆雖然R1000的吸水率、線膨脹係數及彎曲係數等方面較全芳香聚酯樹脂優異,但其玻璃轉移溫度及熱變型溫度較低,因此在某些高負載高溫的使用前需進行審慎的評估

產品種類:R1000板
好料搜尋:高階工業塑膠,工程塑膠,微孔加工

產品特性

The Physical data contained in this table are typical values. They are obtained on the test specimens under specific conditions and represent average values of a large number of tests. The result obtained on this test specimen cannot be applied to finished parts without reservations, as behavior is influenced by processing and shaping. Reproduction only with our declared permission
材質特性資料僅可作為選擇材料之參考,不可做為實際產品使用之依據,此特性資料提供不附帶任何保固和其他用途。

規格尺寸

T/厚 W/寬 x L/長 TYPE/樣式
約略價格 Rough Price/Kg,
交期 Delivery
精準報價 RFQ
NT$40,000-50,000/KG, 7-15Days

資料讀取中.......