產品介紹 /
PA6, Ultramid B, Akulon F, Durethan, Extrusion擠出成型, Nylon聚酰胺, White白色/Blck黑色
very tough at low temperatures, high hardness,
該材料具有最優越的綜合性能，材料堅硬(也適用於低溫)，硬度高，加上韌性、機械減震性和耐磨性。這些特性加上良好的絕緣和耐化學，讓它成為通用級材料，用於各種機械結構零件用途
★high strength and stiffness高強度和剛性
★high impact and notch impact strength高沖抗和刻槽韌性
★high heat deflection temperature 耐熱不型變性
★good at dampening 高蒸氣性
★good abrasion resistance 高耐磨抗耗性
★low coefficient of friction 良好滑動性
★good chemical stability against organic solvents and fuels高化學穩定性，抗有機溶劑和燃油
★food safe 無毒無害
☆Dimension stability, electrical and mechanical properties may become affected by absorbing moisture or water 缺點是吸濕後尺寸變化，力學和電氣性能也會改變
高晶度的聚酰胺屬於工程塑料。具有高強度，硬度和韌性，以及高耐熱不變型性。(使用溫度範圍-40℃到100℃)。由於良好的機械性能在材料濕度適合才能達到，所以要在退火後再次增濕。在空氣中長時間存放也可以到達相對濕度
產品種類:PA6尼龍板,PA6尼龍棒,PA6尼龍管,PA6尼龍薄膜薄板,PA6尼龍軟管,PA6尼龍螺絲螺帽,PA6尼龍華司套筒,Nylon Ball尼龍球(滾珠),PA6射出加工
好料搜尋:N6,尼龍6,NYLON6,工業塑膠,工程塑膠
產品特性
★目前台灣大多採用MC尼龍，取代PA6
The Physical data contained in this table are typical values. They are obtained on the test specimens under specific conditions and represent average values of a large number of tests. The result obtained on this test specimen cannot be applied to finished parts without reservations, as behavior is influenced by processing and shaping. Reproduction only with our declared permission
材質特性資料僅可作為選擇材料之參考，不可做為實際產品使用之依據，此特性資料提供不附帶任何保固和其他用途。
資料讀取中.......