KCM高成電木塑膠好料網-工業塑膠_絕緣材料

請填寫您的材料需求，我們將於24小時內提供專屬您的材料需求建議書(請盡可能填寫，部分條件若不清楚或不要求可忽略不填)

產品介紹

產品名稱 /

PA6 GF30,30%Glass Fiber Filled添加30%玻璃纖維

產品介紹 /

PA6 GF30加玻璃纖維, 30%Glass Fiber Filled添加30%玻璃纖維, Nylon聚酰胺, Akulon K, Ultramid B, Black黑色

Glass fiber reinforced polyamide with very high strength. Good UV stability and increased heat resistance.
玻璃纖維強化，跟PA6相比，強度極高，抗紫外線，高溫不變型性能較好，最大允許使用溫度也較高

The high-crystalline Polyamide ranks as an engineering plastic. PA shows a high thermostability (temperature resistant from -40℃ to approx. +100℃) also high stiffness, hardness and toughness are some of its main characteristics. Due to the fact, that the good mechanical properties will be achieved only after conditioning, this material must conditioned again after an annealing. In addition, this conditioning occurs with a longer storage in air automatically.
高晶度的聚酰胺屬於工程塑料。具有高強度，硬度和韌性，以及高耐熱不變型性。(使用溫度範圍-40℃到100℃)。由於良好的機械性能在材料濕度適合才能達到，所以要在退火後再次增濕。在空氣中長時間存放也可以到達相對濕度

產品種類:PA6 GF30加玻璃纖維棒
好料搜尋:PA6GF30,PA6+GF30,尼龍6加玻璃纖維, NYLON6,工業塑膠,工程塑膠,耐磨耗

產品特性

★應仔細檢查其適用性，因為玻璃纖維會擦傷對應元件的表面，加快對應元件的損耗

The Physical data contained in this table are typical values. They are obtained on the test specimens under specific conditions and represent average values of a large number of tests. The result obtained on this test specimen cannot be applied to finished parts without reservations, as behavior is influenced by processing and shaping. Reproduction only with our declared permission
材質特性資料僅可作為選擇材料之參考，不可做為實際產品使用之依據，此特性資料提供不附帶任何保固和其他用途。