KCM高成電木塑膠好料網-工業塑膠_絕緣材料

請填寫您的材料需求，我們將於24小時內提供專屬您的材料需求建議書(請盡可能填寫，部分條件若不清楚或不要求可忽略不填)

材料需求填寫

產品介紹

產品名稱 /

PA6 MOS2加二硫化鉬,MOS2 Filled二硫化鉬添加

產品介紹 /

PA6 MOS2加二硫化鉬, Grilon, MOS2 Filled二硫化鉬添加, Nylon聚酰胺, Black灰黑色

Good UV stability. High surface hardness.
抗紫外線，表面硬度高，跟PA6尼龍相比，其剛性、硬度和尺寸穩定性有所提高，但沖抗強度下降，二硫化鉬的晶粒形成效果提高了結晶結構，使材料承載和耐磨性能均有提高

The high-crystalline Polyamide ranks as an engineering plastic. PA shows a high thermostability (temperature resistant from -40℃ to approx. +100℃) also high stiffness, hardness and toughness are some of its main characteristics. Due to the fact, that the good mechanical properties will be achieved only after conditioning, this material must conditioned again after an annealing. In addition, this conditioning occurs with a longer storage in air automatically.
高晶度的聚酰胺屬於工程塑料。具有高強度，硬度和韌性，以及高耐熱不變型性。(使用溫度範圍-40℃到100℃)。由於良好的機械性能在材料濕度適合才能達到，所以要在退火後再次增濕。在空氣中長時間存放也可以到達相對濕度

產品種類:PA6 MOS2加二硫化鉬板,PA6 MOS2加二硫化鉬棒,PA6 MOS2加二硫化鉬薄板
好料搜尋:PA6MOS2,PA6+MOS2,尼龍6加二硫化鉬, NYLON6,工業塑膠,工程塑膠,低摩擦係數,耐磨耗,抗UV

產品特性

★無論在大氣中，水汽下，或真空中，二硫化鉬均能有效潤滑機件，此點較石墨粉為優，故可用於太空等真空中作業的機件。

The Physical data contained in this table are typical values. They are obtained on the test specimens under specific conditions and represent average values of a large number of tests. The result obtained on this test specimen cannot be applied to finished parts without reservations, as behavior is influenced by processing and shaping. Reproduction only with our declared permission
材質特性資料僅可作為選擇材料之參考，不可做為實際產品使用之依據，此特性資料提供不附帶任何保固和其他用途。